Negotiable
The date of payment from buyers deliver within days
Henan
Long-term effective
2019-11-20 11:11
400
Company Profile
China Tensynse Intelligent Technologies Co., LtdBy certification [File Integrity]
Contact:haiteng(Mr.)
Email:
Telephone:
Phone:
Area:Henan
Address:Henan
Website:http://www.tensynse.com/ http://haiteng.china-wrl.com/
TUNNELLING JUMBO
Tunnelling jumbo has high rotating speed and strong climbing capacity by the hydraulic drive and the tire chassis running system.The drilling boom is directly positioned by the triangular support. With the self-parallel holding function, the positioning is accurate, stable and of high reliability but low maintenance cost.We specially have type GLZ1 for option.
◆ GLZ1 tunnelling jumbo is equipped with our self-development hydraulic rock drill, which has the automatic anti-jam brazing function and automatic lubrication system.
◆ The machine is also equipped with the energy saving and environmental protection engine,so it can monitor the main parameters of the engine at all times through multifunctional liquid crystal display screen.
◆ The light-weight high-strength aluminum alloy propulsion beam is equipped to ensure the straightness of the drilling hole.
Following is the basic parameter of the type of GLZ1 tunnelling jumbo:
TECHNIC PARAMETER | |||
ITEM |
BASIC PERFORMANCE |
UNIT |
BASIC PARAMETER |
DRILL BOOM |
PROPULSION BEAM |
/ |
360 degree adjustment |
THE LIFTING ANGLE OF THE BIG ARM |
(°) |
+65~-30 |
|
THE ROLLING ANGLE OF THE BIG ARM |
(°) |
±35 |
|
THE WEIGHT OF THE DRILL BOOM |
kg |
1750 |
|
AUTOMOTIVE CHASSIS |
HAULING MODE |
/ |
WHEELED |
DRIVING MODE |
/ |
Four-wheel DRIVING |
|
ENGINE POWER |
KW |
60 |
|
FRONT/REAR TRACK |
mm |
1765/1375 |
|
SPREAD OF AXLES |
mm |
2700 |
|
MAXIMUM HAULING SPEED |
Km/h |
15 |
|
MAXIMUM GRADE ABILITY |
/ |
20% |
|
MINIMUM GROUND CLEARANCE |
mm |
215 |
|
HYDRAULIC SYSTEM |
MAIN MOTOR POWER |
KW |
55 |
SYSTEM PRESURE |
bar |
130-230 |
|
MAXIMUM RESERVOIR FLUID CAPACITY |
L |
150 |
|
FILTER RATING |
µ |
10 |
|
AIR COMPRESSOR |
GAS DISPLACEMENT |
L/s |
4.4 |
MAXIMUM WORKING PRESSURE |
bar |
10 |
|
WATER PUMP |
MAXIMUM FLOW RATE |
L/min |
140 |
FOR THE WHOLE |
L*W |
mm |
10700x2060 |
HEIGHT WHEN WALKING |
mm |
2300 |
|
HEIGHT WHEN WORKING |
mm |
3000 |
|
TOTAL WEIGHT |
kg |
12000 |
|
HYDRAULIC JACK HAMMER |
BIT SHANK |
/ |
R32,R38或T38 |
THE DISTANCE FROM THE FRAME TOP TO THE JACK HAMMER CENTER |
mm |
88 |
|
IMPACT POWER |
KW |
20 |
|
IMPACT FRENQUENCY |
HZ |
42-50 |
|
HYDRAULIC CYLINDER SYSTEM PRESSURE(MAX) |
bar |
230 |
|
ROTARY SYSTEM |
/ |
INDEPENDENT ROTATING |
|
ROTATING SPEED |
r/min |
0-300 |
|
ROTARY TORQUE (MAX) |
Nm |
540 |
|
LUBRICATING GAS CONSUMPTION |
L/s |
5 |
|
WATER CONSUMPTION |
L/s |
1.1 |
|
WEIGHT |
Kg |
170 |
|
LWA dB |
dB(A) |
106 |
|
PROPULSION BEAM |
MODEL |
/ |
BMH2837 |
TOTAL LENGTH |
mm |
5287 |
|
DRILL PIPE LENGTH |
mm |
3700 |
|
DRILLING DEPTH |
mm |
3405 |
|
WEIGHT(INCLUDING JACK HAMMER) |
kg |
494 |
|
MAXIMUM PROPELLING FORCE |
kN |
15 |
|
DRILL BOOM |
PROPELLING COMPENSATION |
mm |
1250 |
EXTENSION LENGTH OF DRILL BOOM |
mm |
1250 |
|
HOLDING THE PARALLEL HOLE |
/ |
OMNIDIRECTIONAL |
Note: Products shall be subject to any changes without additional notices and this products brochure is only for information.
http://www.tensynse.com/